KOPTA TERITORIJA · Straight talk for your garden
Trimming a hedge? Switching on the trimmer is the easy bit.
In the video, a quick pass with the trimmer turns a hedge into a perfect green wall. In your garden, the top is wavy, the ground slopes and nobody has even started on the other side.
Hedge trimming means choosing the shape and cutting depth, tackling the top and sides, then clearing up. A small, regularly maintained hedge can be a DIY job. A tall, wide or neglected one needs more work and different equipment.
Sloping ground. A wonky fence. And you want a neat top.
Up close, the cut looks straight. Step back onto the terrace and there’s the wave. Following every bump won’t straighten it. Taking the whole top down to the lowest dip could remove far more than you wanted.
On a slope, decide whether the top should be level, stepped or follow the ground. Then check what that height means from the house and next door. A lower hedge doesn’t always give you the same privacy.
One string line. Fewer surprises.
Try the line before you trim.
For a straight section, stretch a string between secure supports along the proposed top line. Before switching on, step back and view it from the entrance, path and terrace. Does it reveal a view you wanted to hide? Does the line suit the slope?
Now compare it with the plants. Where would you be trimming new growth, and where would you cut through thick or bare branches? Adjust the line if it means cutting too deeply. The string guides the shape. It cannot tell you how much the plant can lose. Keep it clear of the blades.
“Just a bit more” can leave a lasting mark.
With Smaragd and Brabant thujas, the outer shape doesn’t tell the whole story. Old, bare branches can hide behind the foliage. Routine trimming should leave green growth. A deep cut comes with no promise of a quick recovery.
And not every hedge should be treated like thuja. The plant determines when and how hard to prune. Get the timing wrong with flowering shrubs and you could lose the blooms. Identify what’s growing before choosing the date and tools.
Everything looks easier from the lawn.
With a tall, wide hedge, you need to reach the middle of the top, reposition equipment and keep checking the line. Leaning across branches with a running trimmer is a poor substitute for suitable tools and a stable platform.
Check access on both sides before starting. A narrow strip beside the fence, a flower bed or a blocked passage changes how the job can be done. Two hedges of the same length can be very different jobs.
The clippings won’t bag themselves.
Clippings land on top of the hedge, in the grass, in bark mulch and along the fence. They need collecting and moving, then loading and taking away if required. After a substantial cut, clearing up can be a sizeable part of the work.
Before booking, agree what’s being trimmed: the top, one side or the whole hedge. Discuss cleanup, where clippings will be left and whether removal is included. “Trim the hedge” needs a little more detail.
What should you ask before the first cut?
Can I trim my hedge myself?
Yes, if it’s small, regularly maintained and you can reach all the surfaces without overreaching. A substantial reduction needs an assessment of the plants and the proposed cut line first.
Would a more powerful trimmer solve it?
It may make cutting easier, but it won’t choose the shape or cutting depth. Thick branches need suitable tools, and a tall hedge needs suitable access.
Why can’t you price the job by length alone?
Height, width, access, the sides being trimmed and how much needs removing all matter. Cleanup and removal depend on the amount of clippings too. We agree the final price and scope before work begins.